Control your system from any location with Ashly’s remote controls. RW-8C is a hard-wired wall-mount programmable remote fader controller for Ashly amps and processors that have DSP and a serial data connector. Using Protea NE Software, each fader is assigned to adjust the level of one or more input or output channels or control the DSP matrix mixer. A master fader controls the overall level of all faders.
Features:
- Eight assignable faders and one master fader
- On/Off switch with LED for each fader
- Adjusts levels on single or combined input or output channels
- Wire directly to host unit, no network required*
- Control output at matrix mixer
- Shipping weight: 2lbs (1kg)
- Safety/compliance: CE, FCC, RoHS
Compatible Ashly Products:
- nXe amplifiers**
- nXp amplifiers
- Pema amplifiers
- NE multi-channel amplifiers**
- ne24.24M matrix processor
- NE8800/4800/4400 network processors
*Only one RD/RW-8C can be used per host unit. No other serial communications devices, including the WR-5, can be used when an RD-8C is connected to the data port.
**With DSP installed
![Glow On [Vinyl]](https://www.melodytoolhouse.com/wp-content/uploads/2026/10/glow-on-vinyl.webp)
