JBL ASB6112 Compact High Power Single 12″ Subwoofer
The ASB6112 captures tight, articulate bass that sits perfectly in your mix without muddying the midrange or bleeding into adjacent frequency ranges. Its single 12-inch differential drive woofer delivers controlled, punchy low-end ideal for tracking sessions, mixing suites, and mastering environments where bass accuracy and translation are critical. The compact footprint and high-power handling make it a versatile choice for home studios, project rooms, and portable setups that demand professional-grade bass reproduction without sacrificing studio real estate.
Monitoring & Recording Performance
Maximum continuous output reaches 126 dB-SPL with 132 dB peaks, driven by a 700 W long-term power rating (2800 W peak) that handles extended tracking and mixing sessions without fatigue. Frequency response spans 43 Hz to 1 kHz (±3 dB), with extension down to 35 Hz at –10 dB, providing the full spectrum needed for accurate bass monitoring across virtually any production style. System sensitivity of 96 dB-SPL at 1W means efficient coupling to most studio amplifiers and mixing console outputs.
Cabinet & Construction
The front-loaded vented enclosure uses 16 mm exterior-grade 11-ply birch plywood construction for rigidity and durability, finished in black DuraFlex with IP>3 rating for dust and water protection. Compact dimensions of 406 × 369 × 483 mm (16.0 × 14.5 × 19.0 in) fit tight studio footprints while remaining portable for session work, and 16 suspension attachment points with M10 threaded hardware enable secure placement in any orientation or mounting configuration.
Key Features
- Single 2263H Differential Drive® dual coil dual gap 12″ woofer with neodymium magnet
- Frequency range: 35 Hz – 1 kHz (–10 dB); 43 Hz – 1 kHz (±3 dB)
- Maximum SPL: 126 dB-SPL continuous, 132 dB peak (40 Hz – 300 Hz)
- System sensitivity: 96 dB-SPL, 1W (2.83V) @ 1m
- Long-term power rating: 700 W, 2800 W peak over 100 hours
- Transducer power rating: 1000 W, 4000 W peak over 2 hours
- Nominal impedance: 8 ohms
- NL4 Neutrik Speakon and barrier strip connectivity (up to 10 AWG / 9 mm spade lugs)
- Front-loaded vented enclosure with ultra-robust cone design
- 16 mm exterior-grade 11-ply birch plywood cabinet construction
- 16 suspension attachment points with M10 threaded hardware for flying or mounting
- IP>3 rating for dust and water protection; available in black or white
The ASB6112 combines genuine JBL engineering with a practical form factor that delivers professional low-frequency monitoring and recording wherever your session requires accurate bass.
